NO.230

Woodchip

Wood chips are used for biomass and other renewable energy generation.

NO.190

Weighing system of minimum scale 0.1 g

Increased accuracy in a small amount

NO.197

Opening and closing damper attached to CF-Σ

It can be disassembled and cleaned by one person

NO.203

Coal Feeder

Specialized feeder for coal

NO.179

Simplified sanitary hopper

Upgrading sanitation improvement

NO.184

A small amount of discharging in the hazard area is possible

Loss-in-weight MD with explosion-proof

NO.177

Feeding to extruder for recycle material

The feed rate is controlled without rotational controlled system

NO.153

Introducing Circle Feeder® with special specification

CIRCLE FEEDER -200TSR

NO.159

Circle Feeder with air motor type

Most suitable for explosion-proof area!

NO.125

Requiring for prevention of abrasion and corrosion

Introduction of subjective basis of specification for powder contact section

NO.136

Hand truck type of the Circle Feeder®

CIRCLE FEEDER -700BS

NO.138

Special specification of the Circle Feeder® introduction

6 ports discharge with automatic slide chute

NO.106

Special specification: With swivel function

CIRCLE FEEDER Sanitary type: CS-600-DH

NO.108

Multiple discharging with the Circle Feeder

CIRCLE FEEDER -1000AS

NO.109

YOSHIKAWA Loss-in-weight system

Measuring system introduction

NO.116

Feed control ratio of 1:100

Wide range of moter speed control is realized

NO.97

CIRCLE FEEDER Σ-700

Uniform-rate feeder for fly ash with strong fluidized properties

NO.100

Significant cost-down for overseas transportation

Shipment of divided CF and erection at site (knock down system)

NO.102

Increasing the demand for the Circle Feeder with casing lift type

For prevention of contamination

NO.103

Easy assembly and disassembly type of the CF

Advance of cleaning