Search by major category
No.204Renewed Mini Ace
Compact type with reduced weight and improved measuring accuracy.
No.158High accuracy and a small amount of feeder
Small-quantity feeding at 1.6 cc/h is made possible. Most suitable for small-quantity feeding of resin additive, etc. with poor fluidity.
No.133Smallest model of the Circle Feeder® Introduction
Smallest model of Circle Feeder CF-200. With the inverter built-in, operation can be performed immediately by turning on the power.
No.131Large size slide gate introduction
Large-sized slide gate exclusive to powder and granular material. Powder leakage is prevented with the gland packing type.
No.126Feed rate increased specification
Fully automatic sweet potato steaming system AST: Energy saving, time saving, and manpower saving. The steaming capacity of 10 t/h is supported.
No.117Feeder available for extremely small quantities
Feeder available for extremely small quantities.
No.112It permits discharging of 1gram per hour
JIS test powder with poor fluidity. The MD weight is reduced with aluminum, etc. Measuring and discharge of a very small quantity at 1 g/h is possible.
No.109YOSHIKAWA Loss-in-weight system
The CF loss-in-weight system feeds powder particles with high accuracy while preventing bridging and segregation in the hopper.
No.105Shochu (clean distilled spirit) factory
Continuous steaming and cooling of sweet potato facility: STMAC50. By recycling steam, steam loss is reduced.
No.95Fully Automatic Potato Steamer: AST
Fully automatic from loading, steaming, discharge, to cleaning.
Over 50 units in total records to potato processing facilities for Shochu.
No.94Good reputation! Slide gate valve
Slide gate exclusive to powder. Free from powder leakage to the outside because of gland packing seal.
No.91Special design of the Disk Feeder eliminates vibration !
"Disk Feeder DS" is a table type feeder with rotating bottom panel. Low level of material crushing and breakage makes it most suitable for food related applications.
No.90Suitable equipment for biomass that bridges easily and is difficult to discharge
Biomass resources for which the demand is prospected. Because of the poor property, compatible feeders are limited.
No.84Feeding System For Waste Plastic
Most suitable for feeding of unstable industrial wastes with high accuracy. By the combination of the Circle Feeder and a conveyer scale, high accuracy is realized.
No.79Polymer Dissolution System
Renewal of the coagulant dissolution system YPD. By the original dissolution method, dissolution is achieved without undissolved lump (PAT.).
No.77Special feature on the CF Sigma !
"CF-S (Sigma)" (the integration of the Circle Feeder and a volumetric feeder). The lineup consists of blade type and disk type.
No.63Next-generation of vegetable steamer
For sweet potato as raw material of Shochu, all the processes of steaming, cooling, pulverizing, discharging, cleaning, and sterilizing are automated. Pursues the quality while saving energy.
Storage and transportation of powder are possible by container type. With the Circle Feeder structure provided at the feeding section, lumpy material and material with bridging property can be handled.
No.47The equipment has wide range of functions from steaming to cooling
Automatic operation from loading to discharge is possible. By loading uniformly, uneven steaming is prevented.
The Loop Feeder feeds stably amorphous objects such as industrial wastes which are difficult to handle.
Various types of waste plastics, plastic for agricultural use, waste rubber, waste wire, wood chip, fiber, etc.