Search by major category
No.218Explosion-Proof Compliant Series Products
Other models (feeders) from the same line can be designed for explosion-proof environments.
Functions and specifications are specifically focused on coal applications, thereby enabling a lower cost than with conventional models.
No.197Opening and closing damper attached to CF-Σ
Special specification of High Accuracy Feeder CF-Σ with opening and closing damper attached. It is sanitary type and can be cleaned inner feeder by one person.
No.190Weighing system of minimum scale 0.1 g
Batch measuring system with the minimum scale of 0.1 g. With the MD and an electronic balance as a set, measuring and feeding in the range of trace quantity are realized.
No.184A small amount of discharging in the hazard area is possible
Special specification MD which incorporates the loss-in-weight control as well as the pressure resistant and explosion-proof type servomotor.
No.179Simplified sanitary hopper
Horizontal rotation and manual removal/installation of the hoper are easy. Because the cleaning performance is improved, labor saving can be achieved. The maintenance space is effectively utilized.
No.177Feeding to extruder for recycle material
Discharge of cut pieces of resin molded product in chips. The feeding amount can be controlled without rotation control.
No.159Circle Feeder with air motor type
Most suitable for explosion-proof area because of the air motor type! The capability is adjusted with the air volume. No risk of spark because of the explosion-proof specifications.
No.153Introducing Circle Feeder® with special specification
Model based on the small-sized Circle Feeder with the measuring function attached. Casing open/close type easy to clean.
No.138Special specification of the Circle Feeder® introduction
With 6 ports, material feeding to multiple lines is possible. The chute employs the automatic slide type by air cylinder.
No.136Hand truck type of the Circle Feeder®
With the casters provided, it is possible to move easily. The case of open/close hinge type makes the cleaning operation easy.
No.125Requiring for prevention of abrasion and corrosion
For measures against abrasion, hardened coat construction and ING plate are available. For measure against corrosion, Pyro coat, Teflon coat, etc. are available.
No.123Automatic lift up/down for cleaning improvement
The bottom panel automatic lift up/down type improves the cleaning performance. Even a large-sized feeder is easy to clean and wash.
No.116Feed control ratio of 1:100
Special-specification Circle Feeder using servomotor as the motor with a wide range of control.
No.108Multiple discharging with the Circle Feeder
Makes it possible to feed uniformly or with different capabilities at multiple ports. Usable as a highly accurate and stable distribution feeder.
No.106Special specification: With swivel function
Special specifications of sanitary type for pharmaceutical industry CS-600-DH. Prevents segregation and is easy to clean with swivel function.
No.103Easy assembly and disassembly type of the CF
Cleaning workability is improved by open/close hinge. If GMP compliance is required, the Circle Feeder sanitary type is suitable.
No.102Increasing the demand for the Circle Feeder with casing lift type
Introduction of the sanitary specifications for measures against contamination and improvement of cleaning performance. Automatic/manual lift type. Improves the cleaning efficiency.
No.100Significant cost-down for overseas transportation
Transportation of divided Circle Feeder allows cost reduction for overseas transportation. Cost advantage provided with the large-sized CF.
No.97CIRCLE FEEDER Σ-700
Introduction of the CF-S which is highly effective for prevention of flushing. Delivered to facilities for fly ash with high flushing property.