Search by major category
Features and functions
No.200Powder leaking test in atmospheric pressure
Renewed dedicated gate for Circle Feeder, which reduced costs by improved mechanism, is specialized for powder and granular.
No.164Trace range 1g/hr
Confirmation test of trace-quantity feeding with the MD.
Bentonite with adhesive property and poor fluidity is discharged with the capability of 1 g/h.
Discharge test with "clinker" in spherical shape with wide distribution of particle size. Even for mixed powder, stable discharge without segregation.
No.140Pneumatic activated residual discharge device instruction
Pneumatic activated residual discharge device for reduction of the residual material in the feeder. Most suitable for light material without adhesive property. / A mechanical type is also available.
No.127For reduction of residual material in the feeder
Residual material reduction device for the problem of residual material. Reduces the material loss to a minimum, allowing reduction of the powder changeover time.
No.92Suitable equipment for feeding without causing segregation
Although the inside of hopper is invisible, the Circle Feeder prevents segregation by mass flow discharge.
No.87Renewal of the CIRCLE FEEDER -S (Sigma)
volumetric high accuracy feeder. Easy disassembly and assembly of the feeder improves the maintainability.
No.61Special specification of the Circle Feeder
Simultaneous discharge specifications at two locations with different capabilities. Only one shaft is used for the power, allowing cost reduction of the facility.
No.58The rotary actuated leveler
Rotary actuated leveler for effective utilization of storage tank amount. Even for powder with large angle of repose, the effective capacity is increased.
No.45Prevention of residual material by air-blowing device
Remaining material prevention device for measures against material loss. The test powder is pulp. A mechanical type and a pneumatic type are available. By the combined use, enhanced effect is achieved.
No.32Residual Discharge Device
Most suitable for measures against powder loss at type changeover and cleaning, by reducing the remaining material inside the feeder to a minimum. A manual type with lower cost and an air purge type also are available.
No.27Circle feeder can solve segregation
Mass flow discharge is a characteristic of the Circle Feeder.
Segregation of composed/mixed material is eliminated. First-in first-out prevents earlier material from remaining.
No.25Discharge principle of Circle Feeder
Discharge principle of the Circle Feeder is explained with easy-to-understand video. Discharging from the entire periphery, which disperses the powder pressure uniformly, reduces the load torque.